Kurukshetra
+91 8813083500
robocircuits@gmail.com

Arduino Solar Powered Pong Game

Learn Robotics

Arduino Solar Powered Pong Game

ABOUT THIS PROJECT

In this Arduino Game Project we are going to build an Arduino Game,

the clasic Pong game!

It is a very easy Arduino Project to build, it won’t take you more than 15 minutes! And we can charge it using a solar panel which is stick on its back side. It uses a small battery which give a play time of 4 hours.

In this video we are going to build an Arduino powered Game. It is the classic Pong Game!

You can play it against the computer controlling the green paddle. Each time a player scores, the score is displayed on the screen. The first player to reach 8 points wins! It is a fun project to build and as you are going to find out, it won’t take you more than 10 minutes to build it.

Let’s start!

The parts needed in order to build this project are the following:

——————–WHERE TO BUY——————–

GearBest

Arduino UNO – https://www.gearbest.com/arduino-uno-_gear/?lkid=15018409

Arduino Full Kit – https://www.gearbest.com/development-boards/pp_211518.html?wid=1433363&lkid=14127055

Treansmitter Fi-a6 – https://www.gearbest.com/rc-car-parts/pp_210798.html?wid=21&lkid=13702638

Quadcopter Kit – https://www.gearbest.com/multi-rotor-parts/pp_294317.html?wid=21&lkid=13702609

Amazon India

Arduino UNO R3 – https://amzn.to/2n8NbWi

Ultrasonic Sensor hc-sr04 – https://amzn.to/2ACHEkl

Arduino Beginners kit – https://amzn.to/2n6LUPj

Wi-Fi Wireless Transceiver Module for IOT ESP8266 – https://amzn.to/2M0ttd8

NodeMcu WiFi Development Board – ESP8266 – https://amzn.to/2LOQgtd

Bluetooth Transceiver Module – https://amzn.to/2M077sj

37 in 1 Sensor Modules Kit for Arduino – https://amzn.to/2vysGpA

Servo Motors 2 – https://amzn.to/2AEeJMO

Arduino Nano V3 with USB Cable – https://amzn.to/2vxcxRo

Quadcopter Kit Quad Copter – https://amzn.to/2ADuzqS

Full disclosure: All of the links above are affiliate links. I get a small percentage of each sale they generate.

Thank you for your support!

——————–LIBRARIES——————–

📥 Adafruit GFX: https://github.com/adafruit/Adafruit-…📥

Color OLED library: https://github.com/adafruit/Adafruit-…

Let’s now take a quick look at the code. The code of this project is based on the code of a pong game for the monochrome OLED display. You can find the link for the original code in the description of the video below.

The project needs two libraries in order to compile. We need the Adafruit GFX library and the library for the OLED display. By adjusting the values of these variables you can change the difficulty of the game. You can set the ball speed, the paddle speed, the paddle height and the maximum score in order to make the game fit your taste. That’s it, upload the code to Arduino and have fun! As always you can find the code of the project and links for the libraries in the description of the video below.

📥 http://educ8s.tv/arduino-pong-game

 

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.