Learn Robotics

Ambient Real Time Clock

9+COMPONENTS AND SUPPLIES Arduino Nano R3×1Real Time Clock (RTC)×1Linear Regulator (7805)×1SparkFun LilyPad Rainbow LED (strip of 7 colors)×1 NECESSARY TOOLS AND MACHINES Soldering iron (generic) APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Ambient Lightning Real-Time Clock Aim I made this Clock because I have a addressable LED strip laying around and I want…
Read more

Digital Voltmeter without Arduino

Digital Voltmeter without Arduino

How to use a Colored OLED Display SSD1331

How to drive the Arduino color OLED The display is very small. It has almost the same size as the monochrome OLED display. But the resolution of it is not the same. It has a resolution of 96×64 pixels. So, it has a lower resolution at the same size. It can display 65 thousand colors! The display…
Read more

Led Matrix DIY for Arduino Nano

Dot Matrix 8×8 Make a cheap and good looking LED matrix Things used in this project Hardware components Arduino Nano R3 × 1 LED (generic) × 1 OSH Park Custom fabricated PCB × 1 Software apps and online services Arduino IDE Hand tools and fabrication machines Soldering iron (generic) Story Theory of LED dot matrix…
Read more

Arduino Quadcopter

By PrashantS161Follow Its not only a Quadcopter ,,,, Its a open source Machine!!!! Many of you face a problem when it comes to Flight Controller which is the brain of the Multirotor. There are plenty of ready-made pre-flashed Flight controllers in the market for cheap, But have you thought of building your own Flight controller with…
Read more

Live Subscribe Counter NodeMCU

What is NodeMCU? NodeMCU is an open source IoT platform. It includes firmware which runs on the ESP8266 Wi-Fi SoC from Espressif Systems, and hardware which is based on the ESP-12 module. … It is based on the eLua project, and built on the Espressif Non-OS SDK for ESP8266. It uses many open source projects, such…
Read more

Arduino Spirit Level with LCD

Parts list: Arduino board LCD 16×2 Gyroscope MPU-6050 Potentiometer 10K Resistor 220 ohm Breadbord Connecting wire Wiring: Video: Code: #include <LiquidCrystal.h> LiquidCrystal lcd(7, 8, 9, 10, 11, 12); #include <Wire.h> //Declaring some global variables int gyro_x, gyro_y, gyro_z; long acc_x, acc_y, acc_z, acc_total_vector; int temperature; long gyro_x_cal, gyro_y_cal, gyro_z_cal; long loop_timer; int lcd_loop_counter; float angle_pitch,…
Read more

Line Follower Robot Arduino 

Line Follower Robot Arduino Line Follower Robot follows a black line. arduino project infrared ir sensor line follower COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO × 1 SparkFun Dual H-Bridge motor drivers L298 × 1 Proximity Sensor × 1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast…
Read more

Open Pilot GCS

OpenPilot You can use the OpenPilot Ground Control Station (GCS) both to configure your controller board and to control and monitor your aircraft during flight. More commonly, you would use a conventional radio control transmitter to control your vehicle, but the GCS is also capable of doing so.   All OpenPilot products use the same…
Read more

Skip to toolbar