OpenPilot

You can use the OpenPilot Ground Control Station (GCS) both to configure your controller board and to control and monitor your aircraft during flight. More commonly, you would use a conventional radio control transmitter to control your vehicle, but the GCS is also capable of doing so.

 

All OpenPilot products use the same Ground Control Station. OpenPilot GCS is currently available for the Windows, Mac, and Linux operating systems.




Downloading the GCS installer

The first step is to download the appropriate GCS installer. Using the release table below, select the Download Link that corresponds to your computer’s operating system.

If updating from a previous release, you may wish note the current settings for your vehicle first by creating a .UAV file or taking screenshots of vehicle settings.

Important

The software on this page comes with no warranty. Use it at your own risk and please be careful!

Visit the OpenPilot forums if you have questions and/or suggestions. Extensive documentation about how the system works and how to install and configure it is available in this wiki.

Latest version can be found here: http://www.openpilot.org/download/.

RELEASE – OP-15.05.02 – Revolution Nano, Revo, OPLM and Platinum GPS

Note

Please note that CC3D is NOT supported by this release. To find the latest release for the CC3D, please see Release – 15.02.02 below.

Windows NSIS Installer

OpenPilot-RELEASE-15.05.2-win32.exe

Uninstall previous version first.

Mac OS X distribution image

OpenPilot-RELEASE-15.05.2-osx.dmg

Open as a standard distribution image.

Linux 64 bit Debian package

openpilot_15.05.2-1_amd64.deb

Uninstall previous version first, then use your system package installer to install.

Note

Please note that Linux .debs will only work with Linux versions Ubuntu 14.04 or later, due to lack of popularity we are no longer building 32 Bit .debs but if needed you can build them easily using the source below and the ‘make package’ command.




Source code

SRC-OpenPilot-RELEASE-15.05.2.tar.gz

[crayon-5cbd994e7f4ab322785628/]

(Previous) RELEASE – OP-15.02.02 – Revo, CC3D, Atom, CC and v9 GPS

This version supports the CopterControl, CC3D, Atom, and Revo as well as the OPLink Modems.

Windows NSIS Installer

OpenPilot-RELEASE-15.02.02-win32.exe

Uninstall previous version first.

Mac OS X distribution image

OpenPilot-RELEASE-15.02.02-osx.dmg

Open as a standard distribution image.

Linux Debian packages

32 bit: openpilot_15.02.02-1_i386.deb
64 bit: openpilot_15.02.02-1_amd64.deb

Uninstall previous version first, then use your system package installer to install.

Note

Please note that Linux .debs will only work with Linux versions Ubuntu 14.04 or later.

[crayon-5cbd994e7f4be759404807/]

Installation of the GCS

Open the GCS installer file that you downloaded and follow these steps:

  1. Choose a language from the drop-down list on the first page, then click OK. (You can cancel installation at any point by clicking Cancel.)
  2. The OpenPilot Welcome screen appears. Click Next.
  3. Review the conditions of the license agreement and then click I Agree to accept the terms.
  4. You can select which components to install in the Choose Components dialog box. Click Next to accept the default selections.

Note

Note that the Mesa OpenGL driver may be required by older operating systems and is a required component for the GCS interface. If major elements of the GCS user interface fail to display, re-installation with selection of the Mesa OpenGL driver may help.




  1. You can specify where to install OpenPilot GCS in the Choose Install Location dialog box. Click Browse to choose a location or Install to install the software in the default location shown in the text box.

    Previous installations of the OpenPilot GCS were installed in the Documents and Settings directory on Windows machines. The latest default GCS location is the standard Program Files location on Windows machines.

  2. OpenPilot GCS installs on your computer. Click Next when installation is complete.

  3. If you have have chosen the default setup, Windows will now install the CDC driver for the Virtual Comm Port of your OpenPilot board.

Note

Note that the CDC driver is not required to connect and configure your OpenPilot board with the GCS. You need the CDC driver for Virtual Comm Port support.

  1. Click Finish to complete installation. (Clear the check box if you don’t want OpenPilot GCS to run immediately.)
  2. If you choose to run OpenPilot GCS immediately, click OK to load the default configuration file.
  3. The OpenPilot GCS start page appears. Congratulations! You can explore OpenPilot GCS or proceed to the next step, Installing or Updating Your Firmware.